MicroPulse 5 is an advanced ultrasonic instrument with has 4 axes of position encoder inputs and is remotely controlled via a high-speed ethernet connection. These features have made it popular for field inspections, using both crawlers and hand-held probes. It is also widely used for in-process inspections, forming the core of an automated inspection system for of all types of manufactured components.

Download product brochure

Pulser Specifications
Pulser	Pulser Voltage	50 to 300 Volts	50 Volt
	Pulser Rise Time	<5 ns	N/A
	Pulser Width	20 nsec to 500 nsec	2 nsec
	Pulser Damping	50Ω to 660Ω in 8 steps	N/A
	Pulse Repetition Frequency	1 Hz to 20 kHz	1 Hz
Receiver Specifications
Receiver Amplifiers	Gain	70 dB	0.25 dB
	Input Noise	2 nV typical	N/A
	Gain Linearity	Better than 0.25dB	N/A
	Input Impedance	660 Ω	N/A
	Bandwidth	.75 MHz to 25 MHz (-3 dB)	N/A
	Channel Crosstalk	< 60dB between channels at 2 MHz
Filters	Analog Filters	0.75 MHz to 12 MHz (-3 dB) Bandpass Filter	Discrete selection
		2.5 MHz to 18 MHz (-3 dB) Bandpass Filter
		3 MHz to 22 MHz (-3 dB) Bandpass Filter
		3 MHz to 25 MHz (-3 dB) Bandpass Filter
		0.5 MHz Bandpass Filter
		1 MHz Bandpass Filter
		2 MHz Bandpass Filter
		4 MHz Bandpass Filter
		5 MHz Bandpass Filter
		10 MHz Bandpass Filter
		5 MHz 2nd Order TOFD Bandpass Filter
		10 MHz 2nd Order TOFD Bandpass Filter
Distance Amplitude Correction	DAC Dynamic Range	0 to 40 dB	0.25 dB
	DAC Trigger	Transmit pulse or material interface echo	User selectable
	No of DAC curves	32 utilising up to 32 kbytes
	DAC update	40 dB/µsec
	DAC Clock Rate	0.78 MHz to 25 MHz	6 settings
Digitizer and Digital Processing
Digitizer	ADC Resolution	12 bits	N/A
	ADC Rate	25, 50, and 100 MHz	User selectable
Rectification	Rectification	No Rectification Fullwave +ve halfwave -ve halfwave	Discrete selection
	Post Rectification Filter	None and 7 selectable settings
Hardware Gates	Gates	1 gate utilizing up to 64 kbytes
	Gate Delay	64 k sample points from trigger or I/F echo
	Interface Echo	Hardware interface trigger for gate and DAC
Digital Processing	Hardware Peak Processing	Up to 80 peaks (N + largest), first peak, largest peak
	Averaging	2 to 256 real-time
	Output Options	Peak processed data or full digitized waveform
	Threshold	5 to 100% of full scale	0.5%
General Specifications
Interfaces	Control Interface	100 Base-T Ethernet , Gigabit Ethernet
	Digital Encoders	4 axes of differential quadrature inputs accepting 5 and 15 Volt encoders at rates of up 700 kHz
	Digital I/O	8 channels. TTL inputs 8 channels Open Collector outputs - sinking up to 400 mA
	Oscilloscope Outputs	Trigger, Gate, Ascan A-Scan output shows either an individual channel or a summed waveform re-constructed from the digitized channels
Connections	UT Connectors	Triaxial LEMO bulkhead: ERA.1S.650.CTL Suitable Mating Connectors: LEMO FFA.1S.650.CTAC47 for Trompeter TRC-50 triax cable LEMO FFA.1S.650.CTAC62 for Belden 9222 triax cable
	Control Connector	IP67 rated 9-pin D-Sub
	Encoder Connector	30 pin receptacle: LEMO FGG.4B.330.CLM Suitable Mating Connector: Lemo FGG.4B.330.CYCD10Z
	Digital I/O Connector	24-pin receptacle: LEMO EGC.4B.324.CLM Suitable Mating Connector: Lemo FGC.4B.324.CYCD10Z
	Scope Output Connector	BNC bulkhead jack
Physical	Case Size	450 mm x 380 mm x 170 mm
	Power Supply	90 - 260 V AC at 45 - 100 Hz
	Weight	15 kg
Environmental	Enclosure	IP20 (rugged chassis available)
	Temperature	Operating: 0 to 40 °C Storage: -20 to 70 °C
	EMC	EN61326
	Safety	EN61010